- 上一篇：ADAMS锥形物料搬运机械手夹持机构设计与分析
- 下一篇：122mm双脉冲固体火箭发动机设计
摘要：在室温 20℃下，使用万能试验机和分离式霍普金森压杆（SHPB）装 置对 RDX-CMDB 推进剂进行了在准静态低应变率和动态高应变率下的压缩实
验。获得了1.1 × 10−4~4.5 × 103应变率范围内的真实应力-应变曲线。实验结果表明：应变率与复合改性双基推进剂的力学性能相关性十分明显。在低应变率下，
真实的应力-应变曲线表现为四个阶段，分别是初始弹性阶段、屈服阶段以及应 变强化阶段、急剧下降段，最后试样破坏。在高应变率下，真实应力-应变曲线 并没有表现出应变强化阶段，取而代之的是应变软化阶段。改性双基推进剂的初 始弹性模量、屈服应力和极限应力均随着应变率的增加而增加，且动态下的表现 比静态更为明显。弹性模量、屈服应力、极限应力与应变率的常用对数具有明显 的线性关系。最后根据准静态压缩实验和 SHPB 实验得到的应力-应变曲线，采 用最小二乘法拟合得到朱-王-唐本构模型，并对该模型的有效性进行了验证，发 现该本构模型在一定程度上可以描述复合改性双基推进剂在屈服点前线性区域 的力学行为。69455
毕业论文关键词：复合改性双基推进剂；分离式霍普金森压杆；冲击力学性能；本构模型
Study on Mechanical Properties Composite Propellant Shock Abstract At 20℃, the use of split Hopkinson pressure bar (SHPB) and universal testing machine to composite modified double base propellant compression experiments at low strain rate. Gained true stress-strain curves of strain rate range which strain rate
in1.1 ×10-4~4.5× 103.The results show that the composite modified double base propellant has obvious strain rate correlation. Under low strain rate, true stress - strain curve showed initial elastic phase, the yield phase and strain hardening stage and a sharp decline in segments, and finally the destruction occurred. At high strain rate, true stress - strain curve of the strain hardening phase disappears, showing strain softening stage. Initial modulus and yield stress modified double base propellant with the increase of strain rate increases, and dynamically more significant than static. Elastic modulus, yield stress, ultimate stress and strain rate common logarithm having significant linear relationship.Finally, according to stress test and quasi-static compression experiments SHPB - strain curve, using the method of least squares fitting Zhu Wang Tang constitutive model that can be used to describe the composite modified double base propellant and yield point near the front of the yield mechanical behavior. Finally, according to stress test and quasi-static compression experiments SHPB - strain curve, using the method of least squares fitting Zhu Wang Tang constitutive model and the validity of the model was verified and found that the constitutive model to some extent, can be described composite modified double base propellant mechanical behavior of the yield point of the front area.
Keywords: Composite modified double base propellant；Split Hopkinson pressure bar；Impact properties；Constitutive Model
目次
目次 1
1.绪论 3
1.1 研究背景、目的和意义 3
1.2.1 霍普金森压杆实验简介 4
1.2.2 国内外研究成果 4
1.3 本文主要研究内容