-
摘要如今，车辆的数量快速增长，从而使各地的交通，尤其是大城市的交通拥堵严重。于是在土地资源日益紧张和人们生活繁忙的今天，立体车库的建立将是一个必要的发展趋势。
- 上一篇：Matlab新型交流电子负载的分析与设计
- 下一篇：基于Matlab的质子交换膜燃料电池PEMFC建模方法研究
本文分析了不同类型立体车库的特点，考虑到城市商区的需求和环境状况，选择了11层圆柱塔式立体车库作为研究设计对象。提出了立体车库的总体设计方案，确定了车库的机械结构和其中主要的运行机构，设计了立体车库的存取车控制系统，确定了车库各部分传感器的配置和分布，并且也确定了车辆存取出入流程和车位管理。采用泓格I－7000系列分布式模块作为核心元件自动遥测并实现对整个立体车库的监控，设计了各个端口的输入输出和硬件系统部分的接线，通过组态王软件设计了系统界面、动画运行并连接测控模块完成存取车功能。34013
关键词 圆柱塔式 立体车库 泓格模块 组态王 存取车控制
毕业论文设计说明书外文摘要
Title The design of the stereo garage control system
Abstract
With the rapid growing number of vehicles recently, the traffic around the country, especially in large cities, is seriously congested. Considering the growing tensions of land resources and people’s busy lives, building stereo garage will be a necessary trend.
In this dissertation, after analyzing the characteristics of different types of tridimensional garage and taking the needs and environmental conditions of the city’s commercial area, 11 layer cylindrical tower garage is chosen as the object of study design. The overall design scheme of the stereo garage is proposed, in which the mechanical structure and main operation mechanism are determined. What’s more, the three-dimensional garage parking control system is designed, the sensor configuration and distribution in each part of the garage is determined, Also the vehicle access process and parking management are determined. The Hongge I-7000 series distributed modules are used as the core component of the automatic telemetering to monitor the stereo garage, each port of the input and output and the hardware wiring are designed. Though Kingview software, the system interface is designed to run animations and the control modules are connected to complete vehicle access function.
Keywords cylindrical tower stereo garage Hongge module Kingview
vehicle access control
目次
1 绪论 1
1.1 研究的背景与意义 1
1.2 国内外研究的现状及发展前景 2
1.3 立体车库的分类 3
1.3.1 升降横移式 3
1.3.2 垂直循环式 3
1.3.3 简易升降式 4
1.3.4 垂直升降式 4
1.3.5 巷道堆垛式 5
1.3.6 多层循环式 6
1.4 研究目标及论文完成的主要任务 6
2 立体车库总体设计方案 7
2.1 圆柱塔式立体车库的机械结构 7
2.1.1 整体框架 7
2.1.2 升降机构 7
2.1.3 旋转机构 7
2.1.4 平移机构 8
2.1.5 车位尺寸及车库分配 8
2.2 圆柱塔式立体车库的控制系统设计 10
2.2.1 控制系统的设计要求 10
2.2.2 硬件系统的方案 11
2.2.3 硬件系统主要组成部分 11