摘要本文主要说明了用于对轮毂进行喷粉处理用的智能喷涂机器人。喷涂机以运行高稳定、扩展性较好的S7-200西门子PLC为控制器，采用光幕传感器测量待喷涂轮毂的宽度，通过控制两组防爆电机的正反转，实现喷涂机喷枪的运动，并使用位置传感器辅助喷涂机做复位运动。以抗粉尘的链轮链条传动和滚轮导轨进行导向。设计了链条的周转运动转化为喷枪的直线往复运动的机构,当喷涂量较大时，可避免频繁的往复运动。62934
本文对关键部位——链轮链条的相关尺寸进行了精确计算；对危险传动轴进行校核，校核结果显示本文设计的传动轴满足强度要求；对喷涂机的控制系统做了初步的研究和设计。因而，在合理的控制系统控制下，设计的喷涂机能够实现预定的喷涂功能，结构强度能够满足安全工作的要求，该喷涂机具有一定的实用价值。
毕业论文关键词 喷涂机 西门子S7-200 链轮链条传动 防爆电机
毕业设计说明书（论文）外文摘要
Title The Design of Intelligent Spraying Robot Used in Spraying Production Line
Abstract This paper mainly described the intelligent spraying robot used in spraying the hub. This Spraying robot selected the highly stable, well-extended Siemens PLC S7-200 as its controller, and used screen sensor to measure the width of to-be-sprayed rims. It realized the movements of the robot’s spraying guns by controlling the two explosion-proof motors , and used two position sensors to assist the spraying robot to reset itself. It used the chain and chain gear and the roller guide rail against dust. This paper designed of the mechanism to change the chain turnover motion into linear reciprocating motion of the spaying guns, which avoids of the frequent reciprocating motion when spraying task is heavy.
This paper has taken accurate calculation to the key parts -- dimensions of chain and sprocket. It also checked the dangerous driving shaft, which showed that the design of the shaft drive meets the strength requirements. It also did the research and design of control system of the spraying robot. Therefore, when the control system is reasonable, the spraying robot can achieve predetermined spraying function, whose structure strength can satisfy the security requirements of the work. As a result, the spraying machine has a certain practical value.
Keywords Spraying Robot Siemens S7-200 Sprocket and Chain Drive Explosion-Proof Motor
目 次
1 绪论 1
1.1 课题研究背景和意义 1
1.3 论文主要内容 2
2 喷涂机机械结构的设计 4
2.1 产品设计一般要求 4
2.2 喷涂生产线的现状 4
2.3 喷涂机总体设计 5
2.4 喷涂机的结构设计 7
2.4.1 传动机构设计 7
2.4.2 传动机构的总体方案选择 9
2.4.3 水平方向传动机构设计 10
2.4.4 竖直方向传动机构设计 15
2.4.5 联轴器的选用 18
2.4.6 电机的选用 19
2.4.7 导轨与滑块机构设计 20
2.4.8 喷涂机机架的设计 PLC智能喷涂线喷涂机器人的设计:http://www.751com.cn/jixie/lunwen_69261.html