菜单
  
    The  intermittent spray  characteristics  of  a  multi-hole  and  a  single-hole  diesel  nozzle  were
    experimentally  investigated.  The  hole  number  of  the  multi-hole  nozzle  was  5,  and  the  hole
    diameter of the 5-hole and  the single-hole nozzle was the same as dn=0.32 mm with the constant
    hole  length  to  diameter  ratio  (In/dn=2.81). The  droplet  diameters  of  the  spray,  including the
    time-resolved  droplet  diameter,  SMD  (Sauter  mean  diameter)  and  AMD  (arithmetic  mean
    diameter),  injected  intermittently from  the  two  nozzles  into  the  still ambient were measured  by
    using a  2-D  PDPA  (phase Doppler  particle analyzer). Through  the  time-resolved evolutions of
    the droplet diameter,  it was  found that  the  structure of the multi-hole and  the  single-hole nozzle
    spray  consisted  of  the  three  main  parts  :  (a)  the  leading edge  affected  by  surrounding air  and
    composed  of  small  droplets;  (b)  the  central  part  surrounded  by  the  leading  edge  and  mixing
    flow  region  and  scarcely  affected  by  the  resistance  of  air;  (c)  the  trailing edge  formed  by  the
    passage of the central part. The SMD decreases gradually with  the  increase in the radial distance,
    and  the constant value  is obtained at the  outer  region of the  radial distance  (normalized by hole
    diameter)  of 7-8  and  6  for  the  5-hole  and  single-hole nozzle,  respectively. The  SMD  along  the
    centerline of the  spray decrease  shapely with  the  increase  in the  axial distance after  showing the
    maximum value near the  nozzle tip. The SMD  remains the constant value near the  axial distance
    (normalized  by  hole  diameter)  of  150  and  180  for  the  5-hole  and  the  single-hole  nozzle,
    respectively.4475
    Key Words:Atomization  Characteristics,  Intermittent Diesel  Spray,  SMD  (Sauter  Mean  Di-
    ameter),  PDPA  (Phase  Doppler  Particle  Analyzer)
    1.  Introduction
    Recently, multi-hole nozzles are widely used  in
    direct  injection  (D.  I.)  diesel engines, owing to  its
    potentiality in  the  reduction of exhaust emissions.
    However,  the  spray  characteristics  of  the  multi-
    * Corresponding Author,
    E-mail :  j klee  @  mec.hiroshima-u.ac.jp
    TEL: +81-824  24  7566;  FAX : +81-824-22-7034
    Department  of  Mechanical System Engineering, Uni-
    versity  of  Hiroshima, Hi&ashi-Hiroshima  739-8527,
    Japan.  (Manuscript Received July  3,  2001;Revised
    September 30, 2002)
    hole  nozzle  are  not  clear  until  now  due  to  the
    sophisticated  geometry  and  the  flow  structure
    inside  the  nozzle  tip,  contrary  to  the  cases  of
    single-hole  nozzles.  Moreover,  many  experimen-
    tal  studies  on  the  spray  characteristics  deal  with
  1. 上一篇:高层建筑钢筋混凝土承台设计英文文献和翻译
  2. 下一篇:模糊PID控制器英文文献和翻译
  1. 柴油机连杆英文文献和中文翻译

  2. 低燃油中的硫的氧化模型...

  3. 船用柴油发动机的活塞组件英文文献和翻译

  4. 电站锅炉暖风器设计任务书

  5. 当代大学生慈善意识研究+文献综述

  6. java+mysql车辆管理系统的设计+源代码

  7. 杂拟谷盗体内共生菌沃尔...

  8. 十二层带中心支撑钢结构...

  9. 河岸冲刷和泥沙淤积的监测国内外研究现状

  10. 乳业同业并购式全产业链...

  11. 酸性水汽提装置总汽提塔设计+CAD图纸

  12. 中考体育项目与体育教学合理结合的研究

  13. 大众媒体对公共政策制定的影响

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回