菜单
  
    摘要本文采用Hummers法将石墨氧化,并用超声对其进行粉碎和剥离,制得氧化石墨烯。将氧化石墨烯加入到羧基丁腈橡胶(xNBR)和丁苯橡胶(SBR)混合胶乳中,制得硫化胶。研究了氧化石墨烯在SBR/xNBR胶乳中的分散性,以及氧化石墨烯对复合材料的硫化性能、机械性能、导热性能、热稳定性等的影响。结果表明,通过Hummers法、超声剥离制备的石墨烯衍生物含有多种含氧官能团;GO的加入可以显著降低硫化时间,提升材料的撕裂强度、导热系数、热稳定性,在GO含量为3 phr时,机械强度最高为18.31MPa,提升了358.9%。33692
    关键词  氧化石墨烯  丁苯橡胶  羧基丁腈橡胶  机械性能
    毕业论文设计说明书外文摘要
    Title   The research of the properties of SBR/xNBR hybrids reinforced by graphene oxide                      
    Abstract
    In this paper, the graphite oxide was carried out by Hummers method, and then exfoliated in water via ultrasonication to smash and release to form graphene oxide. The graphene oxide was added to the carboxyl nitrile (xNBR) and styrene-butadiene (SBR) blended latex, and then manufacture vulcanizate through curing. We studied the dispersion of graphene oxide in SBR / xNBR composite, as well as the effects of graphene oxide on the curing properties, mechanical properties, thermal conductivity, thermal stability of composite.The results show that, graphene oxide which was prepared via oxidation of graphite (Hummers method) and followed by ultrasonication had many different functional groups. The optimum curing time was obviously decreased and the tear strength, thermal conductivity, thermal stability of sample were unparallelly improved with the loading of GO increased. When the content is 3 phr, the maximum tensile strength was obtained, which was 18.31MPa and 358.9% higher than unfilled sample.
    Keywords  Graphene oxide  SBR  xNBR  Mechanical properties
    目   次
    1  绪论    1
    1.1  引言    1
    1.2  氧化石墨烯及其制备    1
    1.2.1  氧化石墨烯的简介    1
    1.2.2  GO的制备    2
    1.4  GO填充橡胶复合材料的改性    4
    1.5  本课题的目的、意义及主要研究内容    5
    2  实验过程    6
    2.1  GO制备    6
    2.1.1  实验药品和仪器    6
    2.1.2  实验流程    6
    2.2  SBR/XNBR/GO复合材料制备    7
    2.2.1  实验药品和仪器    7
    2.2.2  实验流程    7
    2.3  表征及性能测试    8
    2.3.1 红外光谱(FTIR)测试    8
    2.3.2  XRD测试    8
    2.3.3  X光电子能谱    8
    2.3.4  AFM原子力显微镜    9
    2.3.5  扫描电子显微镜    9
    2.3.6  动态机械性能    9
    2.3.7  硫化性能    9
    2.3.8  拉伸性能    9
    2.3.9  撕裂性能    9
    2.3.10  热失重分析(TGA)    9
    2.3.11  导热系数测定    9
    3  结果与讨论    10
    3.1  氧化石墨烯表征    10
    3.2  硫化性能    11
    3.3  X射线衍射(XRD)    13
    3.4  SEM表征    13
    3.5 机械性能    14
    3.6 热失重分析(TGA)    16
    3.7 导热性能测试    17
  1. 上一篇:超声提取分离黄芩中黄芩苷的研究
  2. 下一篇:多氮化合物的设计与合成
  1. 原位生成ZDMA对HNBR/HXNBR共混胶性能的影响

  2. HNBR/HXNBR共混胶配合体系的研究

  3. SBR废水处理脱氮除磷优化工艺的研究

  4. SBR日处理600立方米油墨废...

  5. Ga2S3-Sb2S3-CsBr硫卤玻璃的制备与性能研究

  6. 温度对A/O SBR工艺污水处理效果的影响研究

  7. A/O SBR工艺脱氮过程中温室...

  8. 当代大学生慈善意识研究+文献综述

  9. java+mysql车辆管理系统的设计+源代码

  10. 中考体育项目与体育教学合理结合的研究

  11. 电站锅炉暖风器设计任务书

  12. 十二层带中心支撑钢结构...

  13. 大众媒体对公共政策制定的影响

  14. 杂拟谷盗体内共生菌沃尔...

  15. 酸性水汽提装置总汽提塔设计+CAD图纸

  16. 乳业同业并购式全产业链...

  17. 河岸冲刷和泥沙淤积的监测国内外研究现状

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回