菜单
  

    摘  要由于本文并没有现成的烘干机模型可以参考,光凭臆想很难建立出烘干机的仿真模型,所以我们要对烘干机进行一个简单模型设计,以便于我们的仿真。

    利用Solidworks三维建模的CAD软件进行对烘干机的设计,主要对其箱体骨架,箱体的外形晾晒衣物的钢架进行了简单的设计,为我们的仿真建模提供模型参考依据。然后参考我们烘干机箱体外形,利用GAMBIT建模,然后参照市面上所存在的大功率的吹风机,对其同一速度下不同温度入口,同一温度下不同速度入口分别进行Fluent仿真。分析各个情况下的仿真线图,对比在悬挂衣物的区域选取的各个监视点的数据,得到速度和温度的变化图。选择合适的温度和速度,为我们的吹风机的选配提供仿真理论上的依据。最后我们对水蒸发两相流的一个课题进行试探究,看在不同温度墙的情况下水蒸发的情况。56690

    毕业论文关键词:便携式烘干机;蒸发仿真;非定常流动;气液两相流

    Abstract

    Because this is not drying machine model available for reference, assume it is difficult to establish a simulation model of drying machine alone, we should carry out a simple model of design of the dryer, so that our simulation.

    Design of the drying machine using CAD software Solidworks modeling, and the box body frame, box shape steel for drying clothes in the simple design, to provide reference model for our simulation modeling. Then the reference we dryer box shape, using GAMBIT modeling, hair dryer and then reference power exists on the market, to the different temperature entrance the same speed, the same temperature and different speed entrance were simulated by Fluent. Simulation analysis of line in every case, contrast in each monitoring point hanging clothes area selected data, obtained change of velocity and temperature diagram. Select the appropriate temperature and velocity, and provide the theoretical basis for selecting blower of our. A topic we finally on water evaporation two-phase flow test research, look at different temperatures and water evaporation of the wall.

    Keywords:Portable dryer; evaporation simulation; unsteady flow; gas-liquid two-phase flow. 

    目录

    摘  要 VII

    Abstract VIII

    第一章 绪论 1

    1.1 烘干机的国内外研究现状及问题 1

    1.1.1 烘干机的应用与作用 1

    1.1.2 国内外研究现状 2

    1.2 毕业设计的目的及其意义 3

    1.3主要研究内容与要求 3

    第二章 便携式衣物烘干机的设计 4

    2.1 便携式衣物烘干机的工作原理 4

    2.2 总体设计 4

    2.3 骨架的设计 5

    2.4 衣物钢架的设计 6

    2.5 箱体设计 8

    2.6 烘干机的外形设计 8

    第三章 流场仿真的数学模型 11

    3.1 流场数值仿真理论 11

    3.2 控制方程 11

    3.3 能量方程和导热方程 13

    3.4 两相流 13

    3.4.1两相流的形式 14

    3.4.2两相流的研究及其研究方法

  1. 上一篇:ADAMS零转弯半径割草机差速器的设计及运动仿真
  2. 下一篇:Pro/E方便床上使用的折叠饭桌设计
  1. solidworks陶鲁斯pt24/7纯双动...

  2. Solidworks95式步枪智能化导轨设计

  3. SolidWorks40mm的3连发自动炮炮身设计

  4. SolidWorks新型狙击榴弹发射器设计

  5. SolidWorks低膛压弹药连续发射装置研究

  6. SolidWorks频率可调式炮口减振器设计

  7. SolidWorks无轨式螺旋速冻装...

  8. 十二层带中心支撑钢结构...

  9. 乳业同业并购式全产业链...

  10. 河岸冲刷和泥沙淤积的监测国内外研究现状

  11. java+mysql车辆管理系统的设计+源代码

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. 当代大学生慈善意识研究+文献综述

  14. 中考体育项目与体育教学合理结合的研究

  15. 杂拟谷盗体内共生菌沃尔...

  16. 电站锅炉暖风器设计任务书

  17. 大众媒体对公共政策制定的影响

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回