摘要本设计为上海信息科技园5#写字楼建筑与结构设计,结构型式为现浇钢筋混凝土框架结构,地上8层。高度为37.8米。建筑总体型属于不规则建筑,不规则的体型虽然不便于施工,但是通过计算提高了建筑的抗震能力。43511
设计内容主要为REVIT建模和结构设计。
建筑设计过程主要是REVIT翻模。
结构设计过程包括结构方案的确定、结构计算和结构制图。
结构方案确定后进行结构计算,学习并运用通用建筑结构设计软件——PKPM建立模型、进行上部结构的整体计算。
依据设计方案按制图标注绘制了建筑施工图。
依据计算结果按制图标准绘制了结构施工图。
毕业论文主关键词:现浇钢筋混凝土框架结构,建筑设计,结构设计。
Abstract
Comprehensive building, Shanghai Tianhua High-Technology Park No.5 Office Building Architectural and Structural Design
The design for the building of supporting floor, comprehensive building in Shanghai calls for center industry base and structure design, structure form for cast-in-situ reinforced concrete frame structure, eight floors on the ground, the underground layer. Height of 25.5 meters. The total construction size comparison rules, the rules are not only convenient for construction, but also conducive to the structural seismic.
The main content of the design is Revit re-design and structural design.
Architectural design process mainly includes the design and the construction drawing.
Structure design process including the structure scheme, structure calculation and structure drawing.
Structure calculation structure plan, learn and apply the general building structure design software -- PKPM model, the upper structure of the integral calculation
According to the design scheme according to the system icon note drawing construction drawing.
According to the calculation results by drawing standard drawing construction drawing.
Key Words:cast-in-place reinforced concrete frame system; structure design; Revit re-design
目录
1.摘要 3
1 建筑设计 5
1.1 设计依据 5
1.2 设计要求 5
1.3 办公楼建筑设计 6
1.3.1 平面设计 6
1.3.2 柱网布置: 6
1.3.3 外立面设计: 6
1.3.4 剖面设计: 6
1.3.5 交通组织及防火疏散设计: 6
1.3.6 采光通风: 7
2 结构方案设计 9
2.1 设计依据 9
2.1.1工程设计使用年限 9
2.1.2自然条件 9
2.2 设计要求 9
2.2.1设计条件 9
2.2.2设计荷载 10
2.2.3设计规范及规程 10
2.3 结构方案 10
2.3.1结构选型 10
2.3.2 结构布置 10
2.3.3 基础形式 10
2.4 主要材料 11
2.4.1材料 11
2.4.2钢筋接头形式