菜单
  

    摘要由于设施的老旧和技术落后等缘故,矿难事件不断出现,造成了严重的危害。此次课题的要求,是构造出一款遥控采煤机系统,能够远程操控采煤机,让作业人员远离井下危险区域。从而优化作业环境,降低作业风险,同时还能保证作业效率。70404

    文中将采煤机系统进行无线化设计,并同时对所使用到的硬软件进行了说明。为了实现无线操控,本文使用了PT2262/2272通信芯片来完成本次遥控设计任务,辅助以AT89C52单片机作为控制核心,所设计的系统能实现遥控采煤机的全部开采动作。

    另外,将遥控系统模块化设计,并对每个模块的功能、工作方式进行了分析介绍,也相应的画出其电路图,达到一个模块对应一个功能的设计要求。在设计遥控装置的时候,严格遵照工业上的设计标准,达到一个按键对应一个动作的要求。

    该论文有图21幅,表6个,参考文献19篇。

    毕业论文关键词:  遥控  采煤机  无线通信

                           

    Design of remote control system for coal mining machine based on wireless communication technology

    Abstract Because of the old facilities and backward technology and other reasons, the accident appear, caused serious harm. The subject of the requirements, is to construct a remote control shearer system, remote control shearer, so that operators away from the underground dangerous area. To optimize the operating environment, reduce operational risk, while also ensuring the efficiency of operations.

    In this paper, the coal mining machine system for wireless design, and at the same time on the use of the hardware and software are described. In order to realize wireless control. In this paper, we use the PT2262 / 2272 communication chip to complete the design of the remote control for the task, aided by AT89C52 as the control core, the designed system can realize remote control shearer mine all action.

    In addition, the modular design of the remote control system, and the function of each module, the work of the analysis of the introduction, also corresponding to draw its circuit diagram, to achieve a module corresponding to a function of the design requirements. In the design of remote control device, strictly in accordance with the industrial design standards, to achieve a button corresponding to a movement of the requirements.

    Key words: remote control  coal mine  wireless communication

                    

    目录

    摘 要 I

    Abstract II

    图清单 IV

    表清单 IV

    1 绪论 1

    1.1课题的研究背景及来源 1

    1.2 课题研究动态及发展趋势 2

    1.3 设计的任务和方法 2

    1.4 本章小结 2

    2 采煤机遥控系统设计方案 3

    2.1  采煤机遥控系统设计框架 3

    2.2 采煤机液压系统介绍 4

    2.3 采煤机系统功能及设计原则 5

    2.4  本章小结 6

    3 采煤机遥控系统硬件设计 7

    3.1 芯片选型 7

    3.2 发送模块硬件设计 16

  1. 上一篇:ZigBee+CC2530火灾预警系统设计+程序+电路图
  2. 下一篇:FPGA学校打铃器设计+程序+电路图
  1. pic16f877单片机可遥控的多...

  2. RFID无线网络的城市公共自...

  3. C8051F410单片机电动自行车...

  4. RFID车联网移动无线数据通信系统设计

  5. Arduino无线传感网络定位系统设计

  6. 数字化钢轨精细打磨装备4G无线通信系统设计

  7. 基于LTE的OFDM无线传输链路设计与仿真

  8. FPGA的DDS信号源设计

  9. 中央空调监控系统英文文献和中文翻译

  10. HAT模块中GCN5与sgf29亚基的结构分析与功能研究

  11. 基于Arc Hydro Tools长江三角洲水文特征提取

  12. 线性时变系统观测和估计国内外研究现状

  13. 两点边值问题的两种数值方法的比较

  14. 有限责任公司股东退股机制研究+文献综述

  15. “阳光smile”咖啡厅空间设计+答辩PPT

  16. 幼儿园开展特色体育活动的现状问卷调查表

  17. 建筑施工行业研究现状和发展趋势

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回