菜单
  

    in primary and secondary systems are idealized, with a possibility to
    impose a capacity limitation upon them. An example application is to
    use the predicted room cooling/heating peak loads to determine the
    required HVAC system size. Most state-of-the-art BPS tools can be
    used to model systems using this approach. Some, like ESP-r,
    introduce certain complexity by modeling conceptual systems —
    thermal zone interactions through control algorithms. Thus, even
    though the pure conceptual system model is used, system processes
    are not completely idealized. Their interaction with the building is
    more realistically modeled since their characteristics can be included
    in terms of aspects such as heat injection/extraction point, flux limit
    values, response time, and convective/radiant split. In [32] the authors
    state that this method of system simulation is often misunderstood
    and under-rated.
    System-based modeling approach represents the case with pre-
    configured common system types, such as variable air volume system
    and constant-volume variable-temperature system. This modeling
    approach is implemented in DOE-2, eQUEST, Building Energy
    Analyzer, BLAST, DesignBuilder, HAP, etc. The user has flexibility in
    specifying capacities, system flow rates, efficiencies and off-design
    system component characteristics, but is restricted to the system
    configurations and control strategies that are pre-defined in the tool.
    Component-based system modeling approach represents the case
    where a system is specified by (a) network(s) of interconnected
    componentmodels. This approach ismore flexible in terms of possible
    system configurations and control strategies compared to the
    previous approach.
    Component-based multi-domain system modeling approach repre-
    sents the case where component representation is further partitioned
    into multiple interrelated balance concepts, e.g. fluid flow, heat and
    electrical power balance concepts. Each balance concept is then solved
    simultaneously for the whole system. Thus, the overall system of
    equations is broken into smaller systems of equations. Different
    solvers, well adapted for the equation types in question, can be used
    for different problem partitions. It is also possible to easily remove
    partitions as a function of the problem at hand.
    As an addition to the above four categories defined by Hensen [31],
    this paper lists a fifth category: the equation-based system modeling
    approach. This modeling approach represents the case where a
    system is represented by a basic modeling unit that is physically
    “smaller” than a component and that is in the formof an equation or a
    low-level physical process model. It has evolved from the need to
    improve the BPS tools that had been based on technology available in
    the early seventies [33]. Equation-based simulation tools are [34,35]:
    • input–output free (all models are declarative in nature) as opposed
    to the traditional procedural,
    • modular (supported by object-oriented programming languages),
    • hierarchical (enable incrementalmodeling, i.e.models can consist of
    sub-models in multiple levels), which helps in managing the
    complexity of large systems,
    • universal (model definition in a generic form, e.g. using NMF and
    Modelica).
    • They provide separation of modeling the physics from numerical
    solution algorithms.
    • They provide faster developments of simulation models, etc.
    Examples of equation-based tools are:
    SPARK (Simulation Problem Analysis and Research Kernel),
    formerly EKS/US and SPANK, is developed by the Lawrence Berkeley
    laboratory [36]. The primary goal of the EKS/US was improvement of
    the modeling and solution processes which resulted in SPARK. It is an
  1. 上一篇:五轴端铣英文文献和中文翻译
  2. 下一篇:数字式EL定位器英文文献和中文翻译
  1. 中央空调系统英文文献和中文翻译

  2. 通风空调(暖通空调)风...

  3. 利用地板下的空气提高建...

  4. S7-200自动化系统英文文献和中文翻译

  5. 级进模自动化结构设计系...

  6. 建筑暖通空调系统英文文献和中文翻译

  7. 自动化级进模钣金排样英文文献和中文翻译

  8. 中考体育项目与体育教学合理结合的研究

  9. 乳业同业并购式全产业链...

  10. 电站锅炉暖风器设计任务书

  11. 杂拟谷盗体内共生菌沃尔...

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. 当代大学生慈善意识研究+文献综述

  14. java+mysql车辆管理系统的设计+源代码

  15. 大众媒体对公共政策制定的影响

  16. 河岸冲刷和泥沙淤积的监测国内外研究现状

  17. 十二层带中心支撑钢结构...

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回